[. . . ] ENGLISH FRANÇAIS KD-R761 / KD-R661 / KD-R567 / KD-R561 / KD-R469 / KD-R467 / KD-R464 / KD-R462 / KD-R461 CD RECEIVER INSTRUCTION MANUAL RÉCEPTEUR CD MANUEL D’INSTRUCTIONS Please read all instructions carefully before operation to obtain the best possible performance from the unit. Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 17/10/2014 11:15:47 AM For Israel Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. [. . . ] (  17) –08 to +08 (00): Adjusts the output level of the subwoofer connected to the lineout terminals (REAR/ SW) through an external amplifier. (  17) EASY EQ ON / OFF: Turns on or off the subwoofer output. ; LOW 55HZ / MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer. REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [SUB. €05 — +05 (00): Presets the volume adjustment level of each source (compared to the FM volume level). (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at low volume. EXP (Digital Track Expander) TEL MUTING *5 SPK/PRE OUT ON: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ON: Mutes the sounds while using the cellular phone (not connected through KS-BTA100). DISPLAY SETTINGS KD-R761 KD-R567 / KD-R561 *5 Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SELECT]. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow 4 Press the instructions stated on the selected item. Default: XX DISPLAY DIMMER R (right) Rear speakers output Rear speakers output (Mute) Selects the display and button illumination adjusted in the [BRIGHTNESS] setting. (Default: [ON]: 18:00 or 6:00 PM [OFF]: 6:00 or 6:00 AM) AUTO: Changes between the day and night adjustments when you turn off or on the car headlights. *1 For KD-R761 / KD-R567 / KD-R561 / KD-R469, the display and button colors change according to the settings made on [COLOR]. Indd 11 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 11 20/10/2014 8:44:37 AM DISPLAY SETTINGS BRIGHTNESS Sets the button, display and USB input terminal brightness for day and night separately. You can select a color for [ALL ZONE], [ZONE 1], [DISP ZONE], or [ZONE 2] separately. € COLOR 01 to COLOR 29 • USER: The color you have created for [DAY COLOR] or [NIGHT COLOR] is shown. € COLOR FLOW01 to COLOR FLOW03: Color changes at different speeds. € If [00] is selected for all primary colors for [DISP ZONE], nothing appears on the display. COLOR GUIDE ON: Changes the button, display, USB input terminal and auxiliary input jack illumination when settings are performed on menu and list search. [. . . ] € Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. € Insulate unconnected wires with vinyl tape to prevent a short circuit. € Be sure to ground this unit to the car’s chassis again after installation. Installing the unit (in-dash mounting) Caution • For safety’s sake, leave wiring and mounting to professionals. [. . . ]